Elevating the Art of Guitar Repair




Text For Repairs and Setups : ( 519 275 1008 )

Precision work / Fast turn-around / Best price \m/ !


Free Vintage Gibson L-50 Restoration tutorial.

mcconvilleguitars@gmail.com


I consider it a great privilege to have worked on so many wonderful guitars over the last 46 years ... I never take it for granted.

 It is always very gratifying to breathe new life into an old instrument that has sat dormant for so many years.


(Above) You  can see an early proto-type of the TechDeck Workstation.  
The refinement and final design was accomplished over the course of  a few thousand
repairs and restorations, before we distilled the product down to it's present form. 


After a complete refret/new fingerboard binding / Ivory nut / top crack spliced /side repaired /
and ' retro-fit ' Kent Armstrong floating bridge pickup with volume and tone controls ; rest assured that this guitar will be played more than it ever was !


Seeing as this guitar already had a hole drilled in the side .. after some consultation with the customer, we decided to reinforce the hole with a cross grain patch and utilize it for our input jack .




This a quarter-sawn cross-grain patch , to prevent the top from splitting any further.





The Kent Armstrong floating pickup is mounted on the aftermarket replacement pickguard.




Complete Re-Fret + Ivory nut and new binding.

Those brass thumbwheel adjustment discs were buffed out and lightly lubed ... they now turn as smooth as silk under full string load !





This is what it looked like when it arrived

This is the jig I made up to cut out the mess with a 60 Degree 'V' bit.

Another shot of the bash ... pretty nasty.


Ready for the patch


New binding bass side.




Original plastic nut



Finished side repair



Gluing inlay pieces




Setting up for inlay re-glue.